Congratulations on your new safety selector! Before making any upgrades to your AR, make sure that you follow standard gun safety guidelines. Make sure your firearm is unloaded and facing in a safe direction.

Installation Instructions

1. Remove your upper receiver.
2. Take the bottom plate off your grip.
3. Use an appropriately sized wrench and unscrew the bolt inside your grip.
4. Remove your grip. *NOTE: Keep track of the detent and spring for the grip’s reinstallation.
5. Remove the old safety from your lower.
6. Install the RISE Ambidextrous Safety Selector until it’s flush with your lower (ensure the slot on the barrel of the safety selector is in line with the hole on your lower where safety detent is). *NOTE: If you have a RISE Drop-In Trigger it will need to be removed prior to installation. Component triggers can be left in.
7. Use the pointed tip of the paddle to push in the detent and then slide the paddle on.
8. Re-install the grip.
9. Perform a function test to ensure the safety is operating properly.

If you have any questions along the way or any issues with your trigger, please reach out to us. We’re here to help! [email protected] | 844-747-3308