The Blitz G2 makes high performance easy: a crisp break, a fast reset, and a Slide-and-Snap install that takes under a minute with no tools. It outperforms triggers that cost $100 more.
Why You’ll Love It
- A crisp break and a fast reset, with no take-up before the shot
- Installs in under a minute with built-in pins, no tools, and no setscrews
- Your choice of flat or curved blade face, swappable in seconds
- Pull Weight 3.5 lb.
- Made in the USA
- Lifetime Warranty
- Free 30-Day Returns
Overview
- Crisp break, no take-up — With NoWay Take-Up™, trigger movement begins right at the sear. There’s no slack to pull through, so the pull is short and predictable shot after shot, and your groups tighten.
- A reset you can feel and hear — The Quik-Klik™ reset is short, tactile, and audible. The trigger’s ready again after a fraction of the travel, so your follow-up shots come faster.
- In and running in under a minute — The Slide-and-Snap™ install slides into your lower and locks in place with anti-walk and anti-rotation pins built into the housing. No tools, no setscrews, no loose hardware, and often no need to remove the grip or safety selector.
- Flat or curved, your call — Comes with your choice of blade face, flat or curved, in black, RISE Red, or silver. The flat blade face has a subtle index at the bottom that keeps your finger in the same spot every shot. (It’s inspired by the RA-434 HPT’s blade.) The curved blade face gives your finger a broad, stable platform.
- Locked on, swaps in seconds — Patent-pending TorLok™ technology secures the blade face with a mechanical lock and a magnet, so it stays put. When you want a different feel or color, you can change it out in seconds with no tools. Every RISE Interchangeable Blade Face fits.
- Built to run hard — Heavy-Hit™ hardened S7 tool steel, a durable black nitride finish, and a housing machined from a solid block of 6061 aluminum. Backed by our Lifetime Warranty and the RISE More-Bang-for-Your-Buck Performance Guarantee.
Additional Features
- Heavy-Hit Hardening — After machining, the S7 tool steel internals are heat-treated to extreme hardness. That means solid hammer strikes and parts that resist wear over thousands of rounds.
- Black Nitride Finish — A diffusion process that hardens the surface of the steel internals and resists wear and corrosion, so the trigger keeps its feel and cleans up easily.
- 6061 Aluminum Housing — Machined from a solid block of 6061 aluminum rather than stamped and bent from sheet steel. Lighter, stronger, and it won’t bend or torque under hard use.
- Made in Broken Arrow, Oklahoma — Designed, precision-machined to aerospace tolerances, and assembled in the USA, and individually inspected before it ships.
- Lifetime Warranty and Performance Guarantee — Backed by the RISE Lifetime Manufacturing Warranty and the More-Bang-for-Your-Buck Performance Guarantee. If it doesn’t deliver no take-up, a crisp break, and a fast, tactile reset, we’ll buy it back.
Key Features
- Trigger Type: Single-stage
- Pull Weight: 3.5 lb.
- Platform Compatibility: ARs with mil-spec lower receiver dimensions (AR-15, AR-10, and AR9), PCC compatible. Calibers include 5.56/.223, .300 BLK, 9mm, 6.5, .308, and more
- Installation: Slide-and-Snap with built-in anti-walk / anti-rotation pins
- Blade Shape: Interchangeable flat or curved blade face (your choice)
- Housing: Precision-machined 6061 aluminum, silver anodized
- Internal Components: S7 tool steel, Heavy-Hit hardened, black nitride finish
- Other Features: Compatible with all RISE blade faces; TorLok blade retention
- Standard Configurations: Flat or curved blade face in black, RISE Red, or silver; black blade base; silver housing
- Country of Origin: Made in the USA (Broken Arrow, Oklahoma)
- Warranty: RISE Lifetime Manufacturing Warranty + RISE More-Bang-for-Your-Buck Performance Guarantee
Included Accessories
- Built-in anti-walk / anti-rotation pins
Upgrade Your AR Trigger
Most ARs leave the factory with a gritty, heavy mil-spec trigger. That trigger can cost you speed and accuracy.
The RISE Blitz G2 Slide-and-Snap AR Trigger changes that in about a minute.
It delivers a single-stage pull with no take-up before the break. You get a crisp break and short, tactile reset.
As a result, you get a fast, hard-hitting, accurate trigger. It helps tighten groups and speed up follow-up shots.
Install in About a Minute
Installation takes just a few simple steps.
The anti-walk and anti-rotation pins come built into the housing. Therefore, you avoid loose parts and extra tools.
Simply squeeze the pins and slide the Blitz G2 into your lower. The pins then seat themselves.
Next, snap on the blade face, and you’re ready to go.
Most installations take less than a minute. You often won’t need to remove the grip or safety selector.
Choose Your Blade Face
The Blitz G2 offers flat and curved blade faces. Choose black, RISE Red, or silver.
The flat blade face features a wide profile and smooth, rounded edges.
A subtle index at the bottom helps keep your finger positioned consistently.
Meanwhile, the curved blade face provides a broad, stable platform. It delivers a comfortable and controlled pull.
The curved option works especially well with gloves or larger hands.
If you’ve used an RA-434 HPT, the flat blade face will feel familiar.
The curved blade face takes its design cues from the original Blitz G1.
Swap Faces in Seconds
The blade face connects to the blade base through patent-pending TorLok™ technology.
TorLok™ combines a mechanical lock with magnetic reinforcement for a secure connection.
It stays firmly attached through hard use. However, you can swap blade faces in seconds without tools.
Every RISE Interchangeable Blade Face fits the Blitz G2. Therefore, you can change your setup without buying another trigger.
Built for Hard Use
The RISE Blitz G2 Slide-and-Snap AR Trigger suits rifles that see serious use.
Run it in the carbine you train with. Keep it in the truck gun behind the seat.
Use it on your .300 BLK build or the AR you take hunting.
Heavy-Hit™ hardened S7 tool steel internals deliver consistent performance through thousands of rounds.
The durable black nitride finish helps protect against corrosion and wear.
RISE machines the housing from a solid block of 6061 aluminum. Unlike stamped sheet steel, it resists bending and torque.
The result is a rugged trigger built to perform when you need it.
It’s made in Broken Arrow, Oklahoma, and backed by our Lifetime Warranty and the RISE More-Bang-for-Your-Buck Performance Guarantee.
INSTALL
Under a minute, no tools
BLADE FACE
Flat or curved, interchangeable
BREAK
Crisp, no take-up, 3.5 lb.
Frequently Asked Questions
How is the Blitz G2 different from the original Blitz?
The Blitz G2 is the second generation of the Blitz. It has the performance the Blitz is known for and adds the Slide-and-Snap install with built-in pins and an interchangeable blade face held by TorLok retention. Its curved blade face is inspired by the Blitz G1 blade. (Its flat blade face is inspired by the RA-434 HPT.)
Does this come with everything needed to complete the install?
Yes. The anti-walk and anti-rotation pins are built into the housing, so no additional pins are needed, and there are no setscrews to tighten.
How do I install the Blitz G2?
For a video and instructions, visit our Slide-and-Snap trigger install page.
Is this an FRT?
No. The Blitz G2 is a single-stage semi-automatic trigger. It fires one round per trigger pull and resets when you let the trigger travel forward.
If you’re running a forced reset selector (FRS), you’ll want the Rev 535 FRS-Compatible Slide-and-Snap AR Trigger. It’s built for the selector’s cam lever and gives you the same built-in pins and interchangeable blade faces.
