KNS Trigger Group Pins .154
Generation JJ - Skeletonized
Overview
The Gen JJ KNS Non-Rotating Trigger Group Pins .154 Inches from KNS Pins were designed with Jesse James Firearms Unlimited out of Austin, TX. These skeletonized trigger pins are the STRONGEST pins that can be produced. The stainless steel Generation JJ pin sets were designed to withstand the high impact of full and semi-auto 9mm, .223, and 7.62mm suppressed weapons.
The black sideplates are black nitride treated, while the stainless sideplates have a matte finish.
The Gen JJ KNS Non-Rotating Trigger Group Pins .154 Inches will protect your AR-15 and are an absolute must-have for all M-16 owners. Special anti-creep retainers will prevent wear on your irreplaceable M-16 or AR-15 receiver. Included are a pin installation tool & 2 Torx wrenches. No modification to firearm required.
The torque spec on the screw is 11 inch/lbs. MAXIMUM. We recommend 8INCH/LBS of torque.
IMPORTANT NOTE: The external width of some AR receivers may vary in the trigger/hammer pin area depending on the manufacturer. The pins being slightly too long will not affect the function or performance.
