42 in stock

Anti-Walk Trigger
& Hammer Pins

The RISE Armament Anti Walk Trigger Pins ensure secure installation of your drop-in trigger. They also improve the reliability of your rifle by eliminating the tendency for standard pins to “walk out” over time.

EARN 15 REWARD POINTS ON THIS PURCHASEJOIN NOW!

Overview

The RISE Anti Walk Trigger Pins set includes all of the following:

  • One (1) trigger pin
  • One (1) hammer pin,
  • Four (4) screws
  • Two (2) Allen wrenches for easy installation

Also, the specs are as follows:

  • Pin diameter .154 inches
  • Pin material: Stainless steel
  • Backed by lifetime guarantee
  • Made in America

The torque spec on the screw is 11 inch-pounds maximum; however, 8 inch-pounds of torque is the recommended amount.

Note: The external width of AR receivers varies in the trigger/hammer pin area, depending on the manufacturer. If the pins are too long for your receiver, you may shorten the pins a small amount by carefully filing material evenly from both ends of the pins. However, this is not required. Longer pins will not affect the function or performance of the rifle.

We also produce a number of triggers with pins already included; be sure to check out the RISE Blitz, the RA-535, the Rave 140, and even more of our AR-15 trigger options.

Key Features

The torque spec on the screw is 11 inch-pounds maximum; however, 8 inch-pounds of torque is the recommended amount.

Note: The external width of AR receivers varies in the trigger/hammer pin area, depending on the manufacturer. If the pins are too long for your receiver, you may shorten the pins a small amount by carefully filing material evenly from both ends of the pins. However, this is not required. Longer pins will not affect the function or performance of the rifle.

We also produce a number of triggers with pins already included; be sure to check out the RISE Blitz, the RA-535, the Rave 140, and even more of our AR-15 trigger options.

Reviews

Frequently Asked Questions

What size replacement screws would be needed.

4-40 X 1/4″

Will these work in with a mil spec trigger

Yes.

What size Allen key is it?

The Allen key is 1/16″

Customer Reviews

Based on 47 reviews

98%
(46)

2%
(1)

0%
(0)

0%
(0)

0%
(0)

W

William Klein

Just What the Doctor Ordered

My AR-15 was relegated to the back of the gun safe because the trigger pin kept walking out after shooting only a few rounds. With the anti-walk pins I have renewed confidence in the reliability of the gun, and have moved it to the front of the safe.

M

Mark Hilliard

Replacement

Love your products. I reason I ordered the pins is I purchased a ar140 and one end of one of the pins was not threaded.

C

C. Cipollone

Good pins

Very nice pins machined with tight tolerances for a perfect fit.

M

Michael JONES

Anti walking pins

Very nice looking, easy to install and work really well. I will purchase another set for my other AR

M

Monty Speer

So far so good thank you